Wednesday 7 November 2018

Painted Glass: Mango & Grape

This card caused me some trouble, mainly because I didn't plan in advance.  I started out with the centre vellum panel and then thought about what to do with it!

I originally made a base card from Highland Heather cardstock and changed my mind at the last minute.  So I was left with an unused Highland Heather card.  On Friday, I'll share what I did with it.
#thecraftythinker #stampinup #cardmaking #diecutting #altereddiecut #gracefulglass , Graceful Glass Vellum, Stained Glass die, enlarging the Stained Glass frame, cutting an oblong frame with a square die, Stampin' Up Australia Demonstrator, Stephanie Fischer, Sydney NSW
Graceful Glass Vellum centre panel with an oblong frame cut with a square Stained Glass die
To make the frame around the centre panel, I "elongated" the square die in the Stained Glass Thinlits set.  It did require a little patience and fiddling.  

  • I first cut a piece of Champagne Foil to size.
  • I positioned the die at the top of the Foil strip, making sure to keep it straight.
  • I positioned the top cutting plate in such a way that the lower horizontal pattern would not cut (See image 1 below)
  • Next, I repositioned the die, ensuring that it lined up and that there would be sufficient overlap to continue cutting the vertical pattern (see image 3 below).
  • I positioned the top cutting plate in such a way that the top horizontal pattern would not cut.
  • I carefully rolled it through the Big Shot, being careful to stop before I reached the lower horizontal pattern.  It's not a very big die, so I didn't roll it far!
  • I then repositioned for the last time - lining up the bottom of the die with the bottom of the Foil strip and making sure that vertical edges all lined up.
  • I then repeated the cutting process, ensuring that the top horizontal pattern did not cut.
  • I then found I needed to tidy up a few areas that had not cut properly with my craft knife.
#thecraftythinker  #stampinup  #howtocutanoblongwithasquaredie #enlargingdieshapes  #cardmaking
Image 1:  Die cutting an oblong with a square die - Positioning the top cutting pad

#thecraftythinker  #stampinup  #howtocutanoblongwithasquaredie #enlargingdieshapes  #cardmaking
Image 2: Die cutting an oblong with a square die - After the first cut

#thecraftythinker  #stampinup  #howtocutanoblongwithasquaredie #enlargingdieshapes  #cardmaking
Image 3: Die cutting an oblong with a square die - Positioning the top cutting pad for the second cut

#thecraftythinker #stampinup #cardmaking #diecutting #altereddiecut #gracefulglass , Graceful Glass Vellum, Stained Glass die, enlarging the Stained Glass frame, cutting an oblong frame with a square die, Stampin' Up Australia Demonstrator, Stephanie Fischer, Sydney NSW
Close up of the Graceful Glass Vellum shows the Shimmer Paint
I coloured the front of the vellum with Stampin' Blend alcohol markers and then used a paint brush to apply some Champagne Mist Shimmer Paint to the rest of the centre panel, leaving the edges unpainted.

I attached the vellum to a piece of Grapefruit Grove cardstock by sponging the back of the vellum with Multipurpose Liquid Glue.

The greeting (from the Hand Delivered stamp set) is heat embossed in silver onto a piece of Gorgeous Grape cardstock and cut out with one of the Bunch of Banners dies.  After cutting, I used some Frost White and Champagne Mist Shimmer Paints to add some definition to the banner.

Thank you for visiting.
'Til next time!
Stephanie

Product List - All available in my online store

2 comments:

  1. So original,Stephanie! TFS - two of my favorite new colors

    ReplyDelete
  2. Thank you, Sue! I really appreciate your kind comment.

    ReplyDelete