Sunday 1 May 2016

Peak A Boo garden with Peak A Boo Peach - Sneak Peek 2016-2017 Annual Catalogue

After my previous Peak A Boo appeared in one of my posts, several people asked me for a tutorial - so I'm happy to say that today's card is the end result of a video tutorial!   Click here to see the video.

I changed the layout and sizes a little but it's the same basic methodology.   

SU, Sneak Peek, Peakaboo card tutorial, Fun Fold,Sitting here, Timeless Textures
The main image combines the stamp sets: Timeless Textures and the brand new set Sitting Here

Thank you again to Norma Lee at Splitcoaststampers from whom I learned about Peak A Boo cards!


SU, Sneak Peek, Peakaboo card tutorial, Fun Fold,Sitting here, Timeless Textures
As the card is opened, the dog becomes a cat!

I chose the colour of the cardstock for the card based entirely on name - what better for a Peak A Boo card than Peakaboo Peach?!!  Then I ran into trouble trying to quickly (I was on a mission!) find decorative paper to go with it!  Under normal circumstances, I'm sure I would have chosen a different colour scheme but, hopefully, the video will successfully show how I make a Peak A Boo card with the window in the corner and all will be forgiven!

I cut the windows and frames with the new Layering Squares Framelits that will be released on 1st June with the launch of the new Annual Catalogue.  I love the fact that this set allows for many combinations: straight edges, scalloped edges and many sizes.  There are 19  (I know - a nightmare for a pedantic person like me!) framelits in the set which can be mixed and matched.
SU, Sneak Peek, Peakaboo card tutorial, Fun Fold,Sitting here, Timeless Textures
I'm not in love with the colour comibination - I was trying to make the video quickly!

The windows I cut are 2 1/8" and I combined that framelit with the 2 1/2" scalloped framelit for the frame.  The layers for the "For You" greeting are: 2 1/8" scalloped square and 1 7/8" straight sided square.

Inside the card I used an offcut of Whisper White cardstock that I trimmed to 4" x 2 5/8" and decorated with the flourish from the Timeless Textures stamp set (in Peak A Boo Peach, stamped off).  This will be my panel to write my message to the recipient of this card.

SU, Sneak Peek, Peakaboo card tutorial, Fun Fold,Sitting here, Timeless Textures
This angle gives a better idea of how the card fits together

SU, Sneak Peek, Peakaboo card tutorial, Fun Fold,Sitting here, Timeless Textures
Another view to give an idea of the mechanism and how to attach the pieces.

I have added some diagrams below for those who prefer the written to the video.  It looks more complicated than it is!

Instructions:

SU, Sneak Peek, Peakaboo card tutorial, Fun Fold,Sitting here, Timeless Textures

  • I cut three pieces of Peak A Boo Peach cardstock:
    Piece 1: 9.5" x 4.75";
    Piece 2: 9" x 6" and
    Piece 3: 6.25" x 6"
  • Score Piece 1 in half at 4.75" and fold
  • Score Piece 2 at 3" (along the long side) and fold back on the left side
  • Score Piece 3 at 6" and fold back the 1/4" tab
  • I adhered the patterned card to these pieces in positions A, B and D in the diagrams above.
  • Turning Piece 2 to the back, I positioned the square die with the blade up against the edge of the folded over card in the lower right quadrant.
  • Then I placed the folded Piece 1 under Piece 2, with the cut edges lined up, and drew around the edges of the window I had cut.  Removing Piece 2, I used the pencil lines to position the square die (with the piece still folded) and cut a window in the first layer. Opening up Piece 2, I then positioned the square die in the groove left from the first pass through the Big Shot and cut the last window.
  • I refolded Piece 1 and put adhesive over the front.  Lining up the windows and the cut edges, I then adhered this to the back of Piece 2.
  • I made three frames from Peak A Boo cardstock and glued them into position.
  • I cut a Peak A Boo mat for the front of the card using a 2 1/8" scalloped square die.
  • I cut a piece of Whisper White cardstock with a 1 7/8" square die, stamped it and adhered it to the scalloped square.
  • I added adhesive to the tab on Piece 3 and adhered the tab to the cut edge on the back of the folded Piece 1.
  • I cut a piece of Whisper White cardstock to 5 1/2" x 2 1/2" and glued this to this inside of the flap on Piece 2 (position C).  I then folded the card so that this panel showed through the window and stamped my images (for a larger image, I would lightly draw pencil marks to define the frame area, arrange the card so that the panel was unobstructed and then stamp my image).
  • I cut a piece of Whisper White cardstock to 5 1/2" square and adhered it to the inside of the back flap (Piece 3).  I then folded the card so that this panel showed and stamped my image.
The finished card is 6" square.

Thank you for your visit - Click here if you'd like to see the video tutorial for the peak A Boo card.

'Til next time
Stephanie

Product List - click an image to shop in my online store

2 comments:

  1. Thank you so much for sharing this Stephanie...I see your idea of making it move smoother works well too. This is such a versatile design xx

    ReplyDelete
    Replies
    1. Thanks Kim. Yes, it's easy to make a few adjustments to the window or just change the look by using different stamps and accessories!

      Delete